Strategic consulting on design optimization, engine performance improvement, emission reduction, and computational fluid dynamics modeling and simulation. Specialty in gas turbine, automotive IC and IS diesel engines. Demonstrated Project Management and leader.

Supported GE Aero Energy in packaging of aero-derivative gas turbines, generators and BOP for power and drive in oil and gas. Responsible for ensuring customer's requirements are met, known risks and containment plans are executed in accordance with GE procedure, and are incorporated in the project BOMs and assuring that the technical integrity of the project is preserved and are complaint with the project scope.Supported fabrication and design of yonggang, Tianyu II COG plants, Duke I and II, Luisiana Electric Power Authority, Pasadena City, 1st Gen (Phillipine's Project), and El Paso comprising of LM2500, LM6000 and LMS100 GE gas turbines and ranging in power from 25MW to 100 MW.Reviewed and approved drawing, solved shop manufacturing issues. Redlined markups of design changes, made changes to the BOM and designs, reviewed and approved supplier drawings, negotiated deviations with supplier's Bids and qualified new suppliers. Show less

Consulting Engineer for General Electric Aerospace. Provided design and Computational Fluid Dynamics (CFD) analysis in support of the retrofitting of the Navy F414 aircraft jet engine combustor with the advance high performance TVC combustor. Conducted the CFD studies of the aerodynamics of the diffuser and the gas feed to the injectors. Participated in internal and external Design Reviews.

* Senior Consulting Engineer to Rolls-Royce. * Managed programs and projects in support of Combustor IPT cost reduction mission, including coordination and liaison on the manufacture of replacement proto-type cast bracket, getting qualification of bracket, senior management approval for a new production bracket. * Concurrently managed a thermal endurance test of a TBC effusion combustor liner wall. * Evaluated supplier flow measurement process for cost reduction opportunity.

* Key Achievements: * Gas Turbine Commissioning Experience * Supervision of Trade and Technicians * Installation of patented Thermocouple to GT exhaust * Gas Turbine Performance prediction * Labview Programming * Emission measurement and calculation * Debugging of brick electronic logic of GMS controller * Operation of GMS computer control * Flow meter re-calibration * Pulsation Probe installation and connection to GMS * Data reduction and active monitoring of online engine data * Assembled, installed and commissioned ALSTOM's Gas Turbine Monitoring System (GMS) at customer's power plants: * parts requisitioning, PC configuration and communication cards modules installation, installation and commissioning of special unique thermocouple thermometers, pressure sensors, and pulsation probes at gas turbine power plants. * Documentation and reporting of work in customers site book. Online data acquisition and use of data for performance evaluation performance related diagnostics.

* Consulting Senior Engineer at General Motors. * Conducted CFD analysis on GM PV8 and L6 SI automobile engines components conducting heat transfer and fluid flow analysis: * Modeled the air flow in the intake and exhaust manifold of IC engines. * Built CFD model to reduce inter-cylinder air flow imbalances. * Built Unigraphics 3D solid models.

* Consulting Engineer with Solar Turbines, Inc. * Designed, developed and analyzed the Dry Low NOx combustor Mercury 50: * Conducted analytical and CFD configuration modeling studies for the combustor liner cooling, aerodynamics, dilution hole sizing and placement. * Optimized burner aerodynamics achieving key design requirements on combustor exit profiles and goals. * Conducted thermal analysis on the recuperator inlet plenum chamber determining plenum wall temperature. * Performed 3D solid modeling using ProE, built and simulated CFD models, post-processed results with presentation of completed work to management. * Liaison Engineer for CFD performed outside the Combustion group. * Conducted combustor liner wall temperature cooling studies.

* Consulting Engineer * Performed aerothermal CFD simulation in support of GE's Lean Premix NOx combustion design, development and optimization work on MS6B and MS7F combustors: * Conducted parametric studies to isolate the effects of geometric factors on the NOx Level, dynamics and aerodynamics of the combustor. * Built computational models, grids, and post-processed performance data as input to the new design. * Calibrated simulation results with experimental and field design data. * Presented results and conclusions to engineers and management.

* Currently engaged with GE Aero Energy where as a Project engineer in the Requisition group, I support several projects involving using GE aero derivative gas turbines with generators to package power supply skids for application in the oil and gas as well as for continuous and peak power needs. Responsibility for Equipment Data Specification for several projects, supplier qualification, variance resolution and Supplier data review. * Key Areas of Excellence: * Equipment Packaging * ECR, NCR and RFI processing * Bill of Material (BOP) processing * Drawing check, revision and markups processing * Developing Project-Specific CADD drawings and parts * Project Mechanical Engineer * Writing and processing Equipment Data Specifications * Hazardous Area Device list development * Supplier qualification * Support Manufacturing, Production and Sourcing to resolve technical issues while ensuring project deadline and requirements are met. * Detailed Gas Turbines 19+ years * Power plant support * Supported many power skids packaging including OMSK, Lansing, Privod, Xinzhuang, Xiamen, JiuJiang, etc.